英国标准： 

BS 476-3 Fire tests on building materials and structures — Part 3: Classification and method of test for external fire exposure to roofs

BS 476-3 建筑材料和构件的防火测试-屋顶外露部分防火测试

BS 476-4 Fire tests on building materials and structures- Part 4: Non-combustibility test for materials

BS 476-4 建筑材料及结构的燃烧试验—第4部分：材料不燃性测试

BS476-5 Fire tests in building materials and structures Part 5: method of test for ignitability

BS 476-5 建筑材料和构件防火测试，第五部分：点燃性测试

BS 476-6 Fire Tests on Building materials and structures – Method of test for fire propagation for products

BS 476-6 建筑材料和建筑构件阻燃防火测试 – 产品火焰传播的测试方法

BS 476-7 Fire Tests on Building materials and structures – Method of test to determine the classification of the surface spread of flame of products

BS 476-7 建筑材料和建筑构件阻燃防火测试 – 产品火焰表面燃烧的等级测定

BS 476-11 Fire tests on building materials and structures — Part 11: Method for assessing the heat emission from building materials

BS 476-11建筑材料及结构的燃烧试验—第11部分-材料热释放评估

BS 476-12 Fire tests on building materials and structures-Part 12: Method of test for ignitability of products by direct flame impingement.

BS 476-12建筑材料和结构的燃烧试验.第12部分:与火焰直接紧密接触制品可燃性试验方法

BS 476-15 Fire Tests on Building Materials and Structures Part 15: Method of Measuring the Rate of Heat Release of Products

BS 476-15建筑材料和结构的防火测试-产品释热率的测试方法

BS 7955 Containment nets and sheets on construction works – Specification for performance and test methods

BS 7955 施工作业用控制网和薄板材.性能和试验方法规范

BS 5839-1:Fire detection and fire alarm systems for buildings — Part 1: Code of practice for system design, installation, commissioning and maintenance

BS 5839-1:建筑物火灾探测和警报系统–第1部分:系统的设计、安装、调试及维护

BS 5803-3：Thermal insulation for use in pitched roof spaces in dwellings. Specification for cellulose fibre thermal insulation for application by blowing.

BS 5803-3：住房的斜屋顶空间的隔热-喷吹的纤维素纤维隔热规范

BS 5803-2：Thermal insulation for use in pitched roof spaces in dwellings- Part 2: Specification for man-made mineral fibre thermal insulation in pelleted or granular form for application by blowing.

BS 5803-2：住房的斜屋顶空间的隔热-用喷吹法施加的丸状或粒状人造矿物纤维隔热层规范

澳洲标准：

AS/NZS 1530.1：Methods for fire tests on building materials，components and structures – Combustibility test for materials

AS/NZS 1530.1：建筑材料、元件和构件的防火测试，第1部分：材料可燃性测试

AS/NZS 1530.2：Methods for fire tests on building materials，Components and structures – Test for flammability of materials

AS/NZS 1530.2：建筑材料、元件和构件的防火测试，第2部分：材料易燃性测试

AS/NZS 1530.3：Methods for fire tests on Building Materials,Components and Structures – Part 3: Simultaneous Determination of Ignitability,Flame Propagation. Heat Release and Smoke Release

AS/NZS 1530.3：建筑材料可燃性、火焰蔓延及热释放烟雾性能测试

AS/NZS 3837：Method of test for heat and smoke release rates for materials and products using an oxygen consumption calorimeter

AS/NZS 3837：氧耗量热计测试材料和产品的释热性和生烟性的测试方法

美国标准： 

ASTM E 84 Standard Test Method for Surface Burning Characteristics of Building Materials

ASTM E 84 建筑材料表面燃烧性能的测定方法

ASTM E136 Non-combustibility test

ASTM E136 不燃性测试

ASTM E 162: Standard test method for surface flammability of materials using a radiant heat energy source.

ASTM E 162: 用辐射热源评定材料表面燃烧性能的试验方法

ASTM E648：Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat

ASTM E648：地面材料临界热辐射测试

ASTM E1354 Method of test for heat and smoke release rates for materials and products using an Oxygen Consumption Calorimeter

ASTM E1354 耗氧量法测定材料释热及烟雾释放速率方法

ASTM D3675: Standard test method for surface flammability of flexible cellular materials using radiant heat energy source.

ASTM D3675:辐射热源法评定柔性多孔材料的表面燃烧测试方法

ASTM D2843 Standard Test Method for Density of Smoke from the Burning or Decomposition of plastics

ASTM D2843:塑料燃烧或分解产生的烟雾密度测试方法

ASTM E 970：Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source

ASTM E 970：使用辐射热能源测定暴露阁楼绝缘地板的临界辐射通量的测试方法

UL 723 Standard Test Method for Surface Burning Characteristics of Building Materials

UL 723 建筑材料表面燃烧性能的测定方法

德国标准： 

DIN 4102-1 Fire behaviour of building materials and elements Part 1: Classification of building materials Requirements and testing

DIN 4102-1:建筑材料和构件的防火性能 第一部分：建筑材料要求和测试的分类等级

测试级别：A1，A2，B1，B2，B3

法国标准：

NF P92-507: 建筑物-建筑材料和装饰材料-根据对火的反应进行分类

NF P92-507: Building- Construction and furnishing materials- Classification according to reaction to fire

NF P92-501: Safety against fire: Building materials – Reaction to fire tests. used for rigid material or flexible materials thicker than 5mm

NF P92-501: 防火安全：建筑材料 – 燃烧反应. 刚性材料和厚度大于5mm的柔性材料（测试级别：M1-M4）

NF P92-503: Safety against fire: Building materials – Reaction to fire tests. Electrical burner test used for flexible materials

NF P92-503: 防火安全：建筑材料 – 燃烧反应. 挠性材料用电燃烧试验（测试级别：M1-M4）

NF P 92-504: speed of spread of flame test used for the materials which are not intended to be glued on a rigid substrate.

NF P 92-504:建筑物—建筑对火反应特性试验—耐火性能试验和火焰蔓延速度测试

NF P 92-505: Dripping test with electrical radiator, used for melting materials.

NF P 92-505: 建筑物- 建筑对火反应特性试验—对热融材料进行的试验:熔滴试验

国际标准： 

ISO 1716 Reaction to fire tests for building Products- Determination of the heat of combustion

ISO 1716建筑制品对火反应试验-燃烧热值的测定

ISO 1182 Reaction to fire tests for products — Non-combustibility test

ISO 1182 产品的阻燃防火测试-不燃测试

ISO5658-2 Reaction to fire tests-spread of flame-Part 2: Lateral spread on building products in vertical configuration

ISO5658-2对火反应试验 火焰传播 第2部分:直立布局中建筑产品侧面火焰蔓延程度

ISO5660-1 Reaction to fire tests-Heat release, smoke production and mass loss rate-Part 1: Heat release rate (cone calorimeter method)

ISO5660-1对火反应试验—热释放、产烟量及质量损失率:热释放速率(锥形量热仪法)

ISO 5660-2: Reaction to fire tests — Heat release, smoke production and mass loss rate — Part 2: Smoke production rate (dynamic measurement)

ISO 5660-2: 燃烧测试－热释放，烟雾产生和质量损失－第2部分：动态测定烟雾的产生率

ISO 5659-2: Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test

ISO 5659-2: 塑料－生烟性测定－第2部分：单烟箱光密度测定

ISO11925-2:Reaction to fire tests-Ignitability of building products subjected to direct impingement of flame-Single-flame source

ISO11925-2:建筑制品对火反应-单一火源可燃性测试

加拿大标准：

CAN/ULC-S102-10:Standard method of test for surface building characteristics of building material and assemblies

CAN/ULC-S102-10:建筑材料和配件的表面燃烧特性测试方法

CAN/ULC-S102-3：Standard method of fire test of light diffusers and lenses.

CAN/ULC-S102-3：灯具的扩散器和透镜防火测试方法

CAN-ULC-S102-2:Standard method of test for surface building characteristics of flooring, floor coverings, and miscellaneous materials and assemblies.

CAN-ULC-S102-2:地板，地面覆盖物和其他材料和配件的建筑表面燃烧特性测试方法

CAN/ULC-S135：standard test method for the determination of combustibility parametres of building materials using an oxygen consumption calorimeter.

CAN/ULC-S135：使用耗氧量热计确定建筑材料的燃烧性能的测试方法 

CAN/ULC-S127：standard corner wall method of test for flammability characteristics of Non-melting foam plastic building materials.

CAN/ULC-S127：墙角法测定非融化泡沫塑料建筑材料的可燃性特性

CAN/ULC-S114-05:Standard method of test for determination of Non-combustibility in building materials

CAN/ULC-S114-05:建筑材料的不燃性测试方法

CAN/ULC-S129：standard method of test for smoulder resistance of insulation(basket method)

CAN/ULC-S 129：绝缘电阻闷烧测试方法