⇒ 轨道交通电线线缆标准 

欧盟标准：EN 45545-2 

EN45545-2: Fire protection of railway vehicles – Part 2: Requirement for fire behaviours of materials and components （R15 / R16）

EN 45545-2: 轨道车辆的防火保护第2部分：材料和元件的防火要求（R15 / R16）

EN 45545-2电线电缆防火测试－试验方法 

EN 60332-1-2单根燃烧测试

EN 60332-3-24 或EN 50305 成束燃烧测试

EN 61034-2 烟雾密度测试

EN 50305  烟雾毒性测试

德国标准：DIN 5510-2 

DIN 5510-2 : Preventive fire protection in railway vehicles; Part 2: Fire behaviour and fire side effects of materials and parts, classification, requirement and test methods

DIN 5510-2: 铁路车辆防火-火车材料和部件燃烧性能和并发现象，分类，要求和测试方法

DIN 5510-2 电线电缆防火测试－试验方法 

DIN EN 60332-1-2单根燃烧测试

DIN EN 50266-2-4/5 成束燃烧测试

DIN EN 61034-2 烟雾密度测试

DIN EN 50305 烟雾毒性测试 

英国标准：BS 6853

BS 6853: Code of practice for fire precautions in the design and construction of passenger carrying trains （Table13 / Table14）

BS 6853: 载客列车设计与构造防火通用规范（表格13 /14）

BS 6853电线电缆防火测试－试验方法：

BS 4066-3成束燃烧测试

BS 6853 Annex D 8.7烟雾密度测试

BS 6853 Annex B烟雾毒性测试

美国标准：NFPA 130

NFPA 130 : Standard for fixed guideway transit and passenger rail systems

NFPA 130：有轨列车和乘客轨道系统标准

NFPA130电线电缆防火测试－试验方法：

FT4/IEEE 1202 电线电缆燃烧测试

ANSI/UL 1685电缆的火焰蔓延、烟释放量测试

法国标准：NF F16-101

NF F16-101 – Railway Rolling Stock Fire Behavior Choice of Material

NF F16-101铁路车辆防火材料的选择

NF F16-101电线电缆防火测试－测试方法和等级划分：

线缆燃烧等级： A, B, C, D

测试方法：NF C32-070 电线电缆燃烧测试

烟雾毒性等级：F0, F1, F2, F3, F4, F5

测试方法：NF X10-702 烟雾密度测试和NF X70-100 烟雾毒性测试

⇒ 电线线缆防火测试-常见标准： 

IEC 60332-1-2: Test for vertical flame propagation for a single insulated wire or cable

IEC 60332-1-2: 单根绝缘电线或电缆在火焰条件下的垂直燃烧测试

IEC 60332-1-3 Tests on electric and optical fibre cables under fire conditions –Part 1-3:Test for vertical flame propagation for a single insulated wire or cable – Procedure for determination of flaming droplets/particles (Identical With EN 60332-1-3:2004)

IEC 60332-1-3测试电纤维电缆火灾条件下–第1-3部分和光：单根绝缘电线或电缆–程序用于燃烧的液滴/颗粒测定的垂直火焰蔓延的试验 

IEC 60332-2-2Tests on electric and optical fibre cables under fire conditions – Part 22：Test for vertical flame propagation for a single small insulated wire or cable – Procedure for diffusion flame (Identical With EN 60332-2-2:2004)

IEC 60332-2-2 测试电纤维电缆火灾条件下第22部分-小绝缘电线或电缆-扩散火焰法垂直火焰蔓延的试验 

IEC 60332-3-24: 2010-08 Test on Electric and Optical Fibre Cables under Fire Conditions Part 3-24: Test For vertical flame spread of vertically—Mounted bunched wires or cables Category C

IEC 60332-3-24  电缆和光缆在火焰条件下的燃烧试验 第3-24 部分：垂直安装的成束电线电缆火焰垂直蔓延试验- C 类 

IEC 60332-3-25 Tests on electric and optical fibre cables under fire conditions – Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables – Category D

IEC 60332-3-25电缆和光缆在火焰条件下的燃烧试验 第3-25部分:垂直安装的成束电线或电缆的垂直火焰蔓延试验 D类

IEC 60332-3-21:2000 Tests on electric and optical fibre cables under fire conditions Part 3-21:Test for vertical flame spread of vertically-mounted bunched wires or cables – Category A F/R

IEC 60332-3-21:2000测试电纤维电缆火灾条件下部分3-21和光学：垂直安装的成束电线或电缆–类F / R垂直火焰蔓延的试验

IEC 60332-3-22 Tests on electric and optical fibre cables under fire conditions Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables – Category A

IEC 60332-3-22 测试导电纤维的火灾情况下电缆第3-22部分和光：垂直安装的成束电线或电缆–类垂直火焰蔓延的试验(Identical With EN 60332-3-22:2009)

IEC 60332-3-23 Tests on electric and optical fibre cables under fire conditions Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables – Category B

IEC 60332-3-23 测试导电纤维的火灾情况下电缆第3-23部分和光：垂直安装的成束电线或电缆–B类垂直火焰蔓延试验

IEC60331-23：Tests for electric cablesunder fire conditions–Circuit integrity–Part 23:Procedures and requirements–Electric data cables.

IEC 60331-23：电缆在着火条件下的试验.第23部分:试验程序和要求–数字电缆

IEC 60754-2 Test on gases evolved during combustion of materials from cables — Part 2: Determination of acidity (by pH measurement) and conductivity（GB 17650.2）

IEC 60754-2电缆材料燃烧时释出气体试验：酸度（pH值测量）和电导率测定（GB 17650.2）

EN 61034-1 Measurement of smoke density of cables burning under defined conditions

EN 61034-1 测量电线在特定条件下产生的烟密度-第1部分: 测试设备

EN 61034-2 Measurement of smoke density of cables burning under defined conditions –Part 2: Test procedure and requirements

EN 61034-2 电线在特定条件下产生的烟密度-第2部分: 测试程序与要求

EN 50265-2-1: Test for vertical flame propagation for a single insulated wire or cable 1kW pre-mixed flame

EN 50265-2-1:单根绝缘电线或电缆1kW的预混火焰的垂直火焰蔓延的试验

EN 50265-2-2 Test for vertical flame propagation for a single small insulated wire or cable – Procedure for diffusion flame

EN 50265-2-2对扩散火焰单根小型绝缘电线或电缆的垂直火焰蔓延的试验程序

EN 50266-2-4:: Common test methods for cable under fire condition—Test for vertical flame spread of vertically-mounted bunched wires or cables –Part 2-4: Procedures

EN 50266-2-4:着火条件下电缆通用试验方法–多根成束垂直火焰燃烧–第2-4部分–类型C

EN 50266-2-5: Common test methods for cable under fire condition—Test for vertical flame spread of vertically-mounted bunched wires or cables –Part 2-5: Procedures

EN 50266-2-5：整束线缆的垂直燃烧测试 第2-5部分：流程－D类

EN 50305 Railway applications-Railway rolling cables having special fire performance

EN 50305 铁路设施-具有特殊防火性能的轨道车辆电缆-试验方法

EN 50305 Railway applications-Railway rolling cables having special fire performance-Test methods, Clause 9.2 Toxicity

EN 50305 铁路设施-具有特殊防火性能的轨道车辆电缆-试验方法，条款9.2毒性试验

EN 50575 Power, control and communication cables-Cables for general applications in construction works subject to reaction to fire requirements.

EN 50575 电力、控制和通信电缆、光缆在建筑施工期间防火性能要求

UL 1581 Reference Standard for Electrical Wires,Cables,and Flexible Cords

UL 1581 电线电缆和软线参考标准

UL 1685 Standard for vertical –Tray fire-propagation and smoke-release test

UL 1685电缆的火焰蔓延、烟释放量测试

UL 2556 Standard for Safety Wire and Cable Test Methods

UL 2556电线和电缆的试验方法

ISO 6722 specifies the dimensions, test methods, and requirements for single-core 60 V cables intended for use in road vehicle applications

ISO 6722 道路车辆-60V和600V单芯电缆-第1部分：铜导线的尺寸、试验方法

BS 4066-3: Tests on electric cables under fire conditions Tests on bunched wires or cables

BS 4066-3: 电线电缆着火条件下测试-第3部分：成捆电线电缆测试

BS 50200：Method of test for resistance to fire of unprotected small cables for use in emergency circuits

BS 50200：紧急线路用非保护型小电缆的耐火性试验方法

BS 7846 Electric cables – 600/ 1000V armoured fire-resistant cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire

BS 7846电缆—受火影响时排放少量烟和腐蚀气体的600/1000V热固绝缘铠装耐火电缆

BS 6387: Test method for resistance to fire for cables required to maintain circuit integrity under fire conditions

BS 6387: 在火灾情况下保持电路完好要求的电缆防火试验方法

NF C32-070: Insulated conductors and cables for installation-Classification tests on conductors and cables with regard to fire behaviour

NF C32-070: 用于安装的绝缘导体和电缆-导体和电缆分类试验

GB/T 12666.1单根电线电缆燃烧试验方法-垂直法

GB/T 12666.1 Test method on a single wire or cable under fire conditions- Part 1: Vertical specimen flame test

GB/T 12666.2单根电线电缆燃烧试验方法 – 水平燃烧试验法

GB/T 12666.2Test method on a single wire or cable under fire conditions – Part 2: Horizontal specimen flame test

GB/T 12666.3单根电线电缆燃烧试验方法 第3部分 倾斜燃烧试验

GB/T 12666.3 Test method on a single wire or cable under fire conditions- Part 3 slanting specimen flame test

GA 306.1阻燃及耐火电缆:塑料绝缘阻燃及耐火电缆分级和要求 第1部分:阻燃电缆

GA 306.1Flame retardant and Fire Resistive cables–Classification and requirement for flame retardant and fire resistive characteristics of plastic insulated electric cables–Part 1:Flame retardant cables